Golden Technologies GC440, GC240, GC340 Vi. Riding Your Companion, Steering in Reverse

Models: GC440

1 37
Download 37 pages 3.08 Kb
Page 20
Image 20
Steering

Companion Owner's Manual: GC240, GC340, GC440

VI. RIDING YOUR COMPANION

Steering

Steering your Golden Companion is easy and logical.

1.With both hands on the handgrips of the tiller (see figure 4.), turn the tiller to the right to travel to the right.

2.With both hands on the handgrips of the tiller (see figure 4.), turn the tiller to the left to travel to the left.

3.Make certain to maintain sufficient clearance when turning your scooter so that the rear wheels will clear any obstacle.

NOTE: Turning your scooter too sharply at too high a speed may create a situation where one of the rear wheels will leave the ground and the possibility of tipping the scooter. Avoid this danger at all times by decelerating and steering a wide arc around corners and obstacles.

Steering in a Tight Spot

If you must steer in a tight spot, such as entering a doorway or when turning around:

1.Bring your Companion to a full stop.

2.Set speed at the lowest setting.

3.Turn the tiller to the direction in which you wish to drive.

For more information on dealing with obstacle and tight spots, see “Control Through Tight Spots” on the next page.

Steering in Reverse

Backing up your Companion requires attention to what you are doing.

1.Use your right fingers to push the throttle control lever or use your left fingers to pull back on the throttle control lever. See figure 5.

2.Turn the tiller to the left to drive in reverse to the left.

3.Turn the tiller to the right to drive in reverse to the right.

NOTE: Your Companion’s speed in reverse is fifty percent of the speed set at the speed control dial.

Companion

20

Page 20
Image 20
Golden Technologies GC440, GC240, GC340 owner manual Vi. Riding Your Companion, Steering in Reverse