Golden Technologies GC240, GC340 Viii. Assembly, Connect the frame sections, Battery Installation

Companion Owner's Manual: GC240, GC340, GC440

VIII. ASSEMBLY

The Companion scooters are easy to assem- ble. Make sure the key is out of the key switch before assembling your scooter.

1. Connect the frame sections.

1.Position the front and rear sections of the frame as shown in figure 20 so that they align properly.

2.Pull up on the T handle to lift the front section.

3.Once the frame hooks are properly aligned (See figure 21), push down on the seat post to secure the frame together. You will hear and feel a positive “snap” sound to confirm that the front and rear frames are connected.

4.Undo the Velcro straps from around the tiller and raise the tiller.

2. Battery Installation.

1.Install the batteries onto the scooter.

2.Reconnect the batteries. See figure 17.

3.Wrap the hook and loop strap around the battery and the battery harness. See fig- ure 22.

ALIGN

FIGURE 20. CORRECT FRAME ALIGNMENT

FRAME HOOK

FIGURE 21. FRAME HOOK

VELCRO™ STRAPS

FIGURE 22. BATTERY INSTALLATION

Companion 24