LiteRider PTC_Owner’s Manual | Rev A_121911 |
IV. ASSEMBLY
Seat Installation
1.Fold the seat back down.
2.Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in the seat post receiver. See figure 4.
Figure 4
3.Insert the seat into the seat post.
4.Push down on the seat to lock into place. Move the seat from side to side to make sure it is locked into place.
Note: To rotate your seat, push down on the seat rotation lever and rotate the seat to the desired position. Release the handle to lock the seat in position.
Be sure the seat is correctly installed and locked before operating your power chair.
13
