LiteRider PTC_Owner’s Manual | Rev A_121911 |
VII. OPERATION
Battery Gauge Flashes Rapidly (even with the joystick released) See figure 15.
The control system safety circuits have operated and the control system has been prevented from moving the wheelchair. This indicates a system trip, i.e. the VR2 has detected a problem somewhere in the wheelchair’s electrical system.
Please follow this procedure:
∙Place the joystick in the center position and turn the control system off and on again to clear the fault. If the fault does not clear, go to the next step.
∙Switch off the control system.
∙Disconnect and reconnect all connectors on the wheelchair and the control system to make sure they are mated securely.
∙Check the condition of the battery.
∙If you can’t find the problem, go to the
∙Switch on the control system again and try to drive the wheelchair. If the safety circuits operate again, switch off and do not try to use the wheelchair. Contact your Golden Technologies representative for service.
Self-Help Guide
If a system trip occurs, you can find out what has happened by counting the number of LEDs on the battery gauge that are flashing. See page 25.
Battery Charge
LED Array
|
|
|
|
|
| On/Off Button |
|
|
|
|
| ||
Speed Setting |
|
|
| Horn Button | ||
|
| |||||
LED Array |
|
|
|
| ||
Speed Setting |
|
|
|
|
| Speed Setting |
|
|
| ||||
SLOWER |
|
|
| FASTER | ||
Figure 15
24
