LiteRider PTC_Owner’s Manual | Rev A_121911 |
IV. ASSEMBLY
Before operating or assembling your LiteRider PTC, be sure to remove the battery deactivate strip and connect the joystick cable to the VR2 controller. Your LiteRider PTC will not power up or operate without completing these steps.
1.Remove the battery pack by pulling up on the handle and remove the battery deactivate strip. See figure 2.
Figure 2 | Figure 3 |
2. Connect the joystick control to the VR2 power module. See figure 3.
Be sure the joystick cable is securely attached to the unit and that the cable is not able to trail on the ground or become entangled on any surrounding objects while the unit is in use.
The LiteRider PTC battery pack weighs 25 pounds. The seat with arms weighs 22 pounds. Removal of arms will reduce the weight of the seat. Please ask for help if you do not feel capable of safely lifting that much weight.
12
