1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

B

A

With the help of a second person, carefully tip

 

 

 

 

 

 

the treadmill onto its left side. Partially fold the

 

 

 

 

 

 

 

 

Frame (56) so that the treadmill is more stable;

 

 

 

 

 

 

38 Hole

83

do not fully fold the Frame yet.

 

 

 

 

 

 

Remove and discard the two indicated bolts (A)

 

 

 

 

 

 

 

81

and the shipping bracket (B).

 

 

 

 

 

 

 

Cut the shipping tie securing the Upright Wire

 

 

 

 

 

 

 

2

(38) to the Base (83). Locate a tie in the indi-

 

 

 

 

 

 

 

cated hole in the Base, and use the tie to pull

 

 

 

 

 

 

 

 

the Upright Wire out of the hole.

 

 

 

 

 

 

 

 

Attach a Base Pad (81) to the Base (83) in the

 

 

 

13

 

 

 

 

location shown with a #8 x 1" Tek Screw (2) and

 

56

 

81

 

 

 

a Base Pad Spacer (13). Then, attach another

 

 

 

2

 

 

Base Pad (81) with only a #8 x 1" Tek Screw (2).

 

 

 

 

 

 

 

2. Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),

2

 

 

 

 

 

 

 

and the shipping bracket (C) from the Base (83).

 

 

 

 

 

 

 

Attach a Wheel (84) with the Bolt and the Nut

 

 

 

 

 

 

 

 

that you just removed. Do not overtighten the

 

 

 

 

 

 

 

 

Nut; the Wheel must turn freely. Discard the

 

 

 

 

83

 

 

 

shipping bracket.

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

84

 

 

 

 

 

8

 

 

 

 

3. Identify the Right Upright (78) and the Right

3

 

 

 

 

 

 

 

Upright Spacer (79), which are marked with

 

38

 

 

 

 

 

 

stickers. Insert the Upright Wire (38) through the

 

 

 

 

 

 

78

Right Upright Spacer as shown. Set the Right

 

 

 

 

 

 

 

Upright Spacer on the Base (83). Be careful

 

 

Wire Tie

 

 

38

not to pinch the Upright Wire.

 

 

 

79

Have a second person hold the Right Upright

 

 

 

 

 

 

83

(78) near the Base (83). See the inset drawing.

 

 

 

 

 

 

 

Tie the wire tie in the Right Upright securely

 

 

 

 

 

 

 

 

around the end of the Upright Wire (38). With

 

 

 

 

 

 

 

 

the help of a second person, hold the Right

 

 

 

 

 

 

 

 

Upright near the Base. Then, pull the other end

 

 

 

 

 

 

 

 

of the wire tie until the Upright Wire is routed

 

 

 

 

 

 

 

 

completely through the Right Upright.

38

 

 

78

 

 

 

 

 

 

Wire

 

 

 

 

 

7

 

 

Tie

 

 

 

 

 

 

 

 

 

 

 

 

Page 7
Image 7
Gold's Gym GGTL80608.0 manual Make sure that the power cord is unplugged, Do not fully fold the Frame yet