4. Hold a Bolt Spacer (80) inside the lower end of | 4 |
|
|
|
|
|
|
the Right Upright (78). Insert a 3/8" x 4" Bolt (6) |
|
| 6 |
|
|
| |
with a 3/8" Star Washer (9) into the Right |
|
|
|
|
|
| |
Upright and the Bolt Spacer. Repeat this step |
| 78 |
|
|
|
|
|
with a second Bolt Spacer (80), 3/8" x 4" Bolt |
|
|
|
|
|
| |
(6), and 3/8" Star Washer (9). Then, set the |
|
| 79 |
|
| 9 |
|
Right Upright in the Right Upright Spacer (79). |
|
|
|
|
| ||
Be careful not to pinch the Upright Wire (38). |
|
|
|
|
| 38 | 77 |
Partially tighten the 3/8" x 4" Bolts (6); do not |
|
|
|
|
|
| |
fully tighten the Bolts yet. |
|
|
|
|
|
| 80 |
Press a Base Endcap (77) into the Base (83). |
|
|
|
|
| 83 | |
|
|
|
|
|
| ||
5. With the help of a second person, carefully tip | 5 |
| B |
|
|
|
|
the treadmill onto its right side. Partially fold the |
|
|
|
|
| ||
Frame (56) so that the treadmill is more stable; |
| A |
|
|
|
|
|
do not fully fold the Frame yet. |
|
|
|
|
|
| |
Remove and discard the two indicated bolts (A) |
|
|
|
|
|
|
|
and the shipping bracket (B). |
| 81 |
|
|
|
|
|
Attach a Base Pad (81) to the Base (83) in the | 2 |
|
|
| 56 |
| |
location shown with a #8 x 1" Tek Screw (2) and |
|
|
|
|
| ||
a Base Pad Spacer (13). Then, attach another |
|
|
|
|
|
| 4 |
Base Pad (81) with only a #8 x 1" Tek Screw (2). |
|
|
|
|
|
| |
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4), |
| 83 |
| 13 |
|
|
|
and the shipping bracket (C) from the Base (83). |
|
|
|
|
| ||
Attach a Wheel (84) with the Bolt and the Nut |
|
|
| 8 |
| 84 |
|
that you just removed. Do not overtighten the |
|
|
|
| 2 |
| |
Nut; the Wheel must turn freely. Discard the |
|
|
|
| 8 | C | |
shipping bracket. |
|
|
|
|
| ||
6. Set the Left Upright Spacer (76) on the Base | 6 |
| 6 |
|
|
|
|
(83). Have a second person hold the Left |
|
|
|
|
| ||
Upright (74) near the Base. Hold a Bolt Spacer |
|
|
|
|
|
|
|
(80) inside the lower end of the Left Upright. |
|
|
|
|
| 74 |
|
Insert a 3/8" x 4" Bolt (6) with a 3/8" Star |
|
|
|
|
|
| |
Washer (9) into the Left Upright and the Bolt |
|
| 9 |
|
|
|
|
Spacer. Repeat this step with a second Bolt |
|
| 76 |
|
|
| |
Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star |
| 77 |
|
|
|
| |
Washer (9). Then, set the Left Upright in the |
|
|
|
|
|
| |
Left Upright Spacer. |
|
|
|
|
|
|
|
Partially tighten the 3/8" x 4" Bolts (6); do not |
| 80 |
|
|
|
|
|
fully tighten the Bolts yet. |
| 83 |
|
|
|
| |
Press a Base Endcap (77) into the Base (83). |
|
|
|
|
|
| |
With the help of a second person, tip the tread- |
|
|
|
|
|
|
|
mill so that the Base (83) is flat on the floor. | 8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
