Gold's Gym GGTL80608.0 manual Not Connected PROPERLY, the CON Sole MAY be Damaged When

7. Attach the Tray (90) to the handrail assembly	7			1	90
with two #8 x 1/2" Screws (1).							Handrail
Have a second person hold the handrail assem-						1
bly near the Right Upright (78) and the Left							Assembly
Upright (74). Connect the Upright Wire (38) to
the console wire. See the inset drawing. The
connectors should slide together easily and
snap into place. If they do not, turn one connec-				74
tor and try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON-
SOLE MAY BE DAMAGED WHEN THE		Console
POWER IS TURNED ON.								38
Remove the wire tie from the Upright Wire (38).		Wire			Console
			38
						Wire
					Wire Tie		78
8. Set the handrail assembly on the Uprights (74,	8						Handrail
78). Be careful not to pinch the wires.
Attach the handrail assembly to the Uprights							Assembly
(74, 78) with six 5/16" x 1" Bolts (7) and six
5/16" Star Washers (10) as shown.
See assembly steps 4 and 6. Firmly tighten	7	10	10	7	7
the 3/8" x 4" Bolts (6).
			74		10
						7	78	10
9. With the help of a second person, hold the con-	9
sole assembly near the handrail assembly.			Console
Connect the two wires from the console assem-
bly to the two wires from the handrail assembly.			Assembly
See the inset drawing in step 7. The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector				Wires
and try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON-							Wires
SOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.

Handrail

Assembly

9