6 Be sure to press the adhesive parts of the brackets firmly to the appliance.
7 Install the eight (8) screws (supplied) to attach the brackets to the pedestal.
8 Move the washer/combo to the desired place. NOTE: The appliance and pedestal assembly
must be placed on a solid and level floor for proper operation. Adjust the legs of the appliance and pedestal by turning with a wrench. Then, adjust the lock nut toward the pedestal while holding the pedestal leg using a wrench.
Lock nut
Adjustable
feet
HigherLower
Adjustable | Adjustable |
feet | feet |
DRYER INSTALLATION
1 Remove pedestal, installation hardware, and instructions from the shipping carton.
2 Position dryer on top of the pedestal. NOTE: Because of the weight of the dryer,
two or more people may be needed.
NOTE: If dryer was previously installed, uninstall |
|
it as follows: | ENGLISH |
1) Unplug the power supply cord, | |
A. Uninstalling an electric dryer: |
|
2) Pull the dryer away from the wall enough to |
|
loosen the vent clamp. Loosen the clamp and |
|
carefully remove the exhaust vent from the |
|
dryer exhaust outlet. |
|
B. Uninstalling a gas dryer: |
|
1) Unplug power supply cord. |
|
2) Turn off the gas supply. |
|
3) Pull the dryer away from the wall enough to |
|
loosen the vent clamp. Loosen the clamp and |
|
carefully remove the exhaust vent from the |
|
dryer exhaust outlet. |
|
for washer/ |
|
combo |
|
for dryer |
|
for dryer
for washer/ combo
3 Remove the paper from the bracket.
3
