Goodman Mfg SS-GME8 dimensions Specifications

Product Specifications

Specifications

GME8

0703BXC*

GME8

0905CXC*

GME8

1155CXC*

Performance Data

Input¹	70,000	90,000	115,000
Output¹	56,000	72,000	92,000
LP Output¹	48,000	64,000	80,000
AFUE²	80	80	80
Tons AC @ 0.5” ESP	3	5	5
Temperature Rise Range (°F)	20 - 50	35 - 65	35 - 65
Circulator Blower
Size (D x W)	10 X 8	10 X 10	10 X 10
HP	1/2	1	1
Speed	4	4	4
Vent Diameter³	4	4	4
No. of Burners	3	4	5
Disposable Filter (in²)	290	480	480
Electrical Data
Min. Circuit Ampacity⁴	8.2	14.8	14.8
Max. Overcurrent Protection⁵	15	15	15
Ship Weight (lbs)	130	163	167

¹Natural Gas BTU/h: for altitudes above 2,000’, reduce input rating 4% for each 1,000’ above sea level. Low-fire rate is 75% of high-fire rate.

²DOE AFUE based upon Isolated Combustion System (ICS).

³Vent diameter may vary depending upon vent length. Refer to the latest editions of the National Fuel Gas Code NFPA 54/ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in

Canada).

4Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in ac- cordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.

5Refers to maximum recommended fuse or circuit breaker size; may use fuses or HACR-type circuit breakers of the same size as noted.

Notes

•All furnaces are manufactured for use on 115 VAC, 60 Hz, single phase electrical supply.

•Gas Service Connection ½” FPT

•Important: It is required to size overcurrent protection device and wires properly and make electrical connections in ac- cordance with the National Electrical Code and/or all existing local codes.

SS-GME8 www.goodmanmfg.com 3