Enter the "seconds" of the desired length of time. Confirm by pressing and holding the function button until the OK-signal will sound. The timer will now be in the Start/ Stop function.

Push the key M to start the timer.

The display will show the remaining time of the count-down. In addition to that, during the last 10 seconds of the count- down, interrupted signals can be heard. At the end of the set time, a continued signal will sound.

To pause the count-down, push the measuring key; pressing it again will

restart the count-down.

The timer will work in the background so that you can use other measurements.

GOSSEN Foto- und Lichtmeßtechnik

11

Page 11
Image 11
Gossen 15122 operating instructions Gossen Foto- und Lichtmeßtechnik