Gossen 15122 operating instructions Exposure measuring

–Confirm the speed you selected by pushing the Function button until the OK-signal sounds and the Digisix returns to the function "EXPOSURE". The film speed is shown in the upper right corner of the display.

If the film speed is changed, the measure- ment read-out stored in the memory will be immediately converted to the new ISO settings.

The film speed selected will stay stored in memory until it is changed in the way described above.

2.2Exposure measuring

–Use the Function button to select the function Exposure Measuring.

–The measurement is taken by briefly pressing down the measuring key M.

2.2.1Read-out of the values measured The EV value measured will appear in the display. The values will be indicated in 1/3 - stop increments by one dot, the 2/3 - stop increments by two dots.

GOSSEN Foto- und Lichtmeßtechnik 7