GoVideo DDV 9300 manual VHS Index Search System, Index Scan, Automatic Show Finder

Use the Index Menu to Scan or

Search for Index Marks

VHS Index Search System

Your Dual-Deck VCR is equipped with a VHS Index Search System (VISS) to help you locate your recordings with ease. VISS is the industry standard, so you can use it with other VCRs and camcorders. Here’s how it works:

•The VCR automatically places an Index Mark at the start of every recording (when this happens, you will see “IDX” flash briefly on the On-Screen Display).

•You can place Index marks manually at any time during a recording by pressing INDEX on the remote control. For best results, avoid placing Index Marks at the beginning of a tape or in segments less than 5 minutes in length.

•You can then Scan or Search for Index marks when the tape is stopped or playing by pressing INDEX (see below).

Index Scan

1	Insert a tape containing recordings in either deck.
2	Press		. The DECK ONE INDEX or DECK TWO
		INDEX
	INDEX
3		menu will appear.
	Press		to scan for Index Marks forward, or		to
		FF		REW
	scan for Index Marks in reverse. The deck will			play	a few
	seconds of tape at each Index Mark, then continue on to
	the next Index Mark.

4 Press	STOP	(or	PLAY ) when you reach the desired Index
Mark.

Index Search

1 Insert a tape containing recordings in either deck.

2 Press INDEX . The DECK ONE INDEX or DECK TWO INDEX menu will appear.

3 Use the number buttons to enter the number of Index Marks you want the system to count before it stops and plays the tape (enter a “0” first for Index Marks 1-9).

4 Press FF to search for Index Marks forward, or REW to search for Index Marks in reverse. When the system counts the indicated number of Index Mark, it will stop and play the tape.

Automatic Show Finder

Automatic Show Finder combines the Date/Time Stamp with the VHS Index Search System (VISS) to ensure you never misplace a recording. Here’s how it works:

1 Record the Date/Time Stamp at the beginning of all your recordings (see page 29).

2 Scan for Index Marks (see above). When the VCR finds an Index mark, it plays the tape for 5 seconds, so you can view each Date/Time Stamp and easily locate your recording.

38DUAL-DECK VCR USER'S GUIDE