24
DHT7000 Home Theater System
Listening to the Radio
1Press the FUNCTION button to switch to the Tuner (AM/FM) function.
• The last station received is tuned in and its band and frequency are displayed on the front panel display.
• You can also press the AM/FM key as a shortcut to enter the Tuner function.
2To select a preset station, press the PRESET +/- buttons on the remote control to skip to the next or previous station.
3To change tuner bands, press the AM/FM button to toggle between AM and FM.
4To tune in non-preset stations, press the TUNING +/- buttons on the remote control:
• To tune manually, press the TUNING +/- buttons repeatedly until the desired station is tuned in.
• To tune automatically, press and hold the TUNING +/- buttons until “Tuned” appears on the front panel display.
5To improve reception, relocate the supplied antennas.
Adjusting Stereo/Mono
If an FM station is noisy, press the ST/MONO button on the remote control so that Mono appears on the front panel display.
• This turns off stereo sound but may improve reception.
• To switch back to stereo, press ST/MONO again.
• Not all stations are broadcast in stereo. For those stations without stereo, pressing the ST/MONO button has no effect.
Adjusting Bass/Treble
While in the Tuner function, press BASS/TREB to toggle between bass and treble.
• Adjust Bass level from -6dB to +6dB.
• Adjust Treble level from -6dB to +6dB.