16
VCR Operation Setup (Continued)VCR Setup Menu Options
11
Press MENU to display the MAIN menu.
22
Use vv/VVto select the SETUP menu, then press
ENTER.
The SETUP menu will appear.
33
Use vv/VVto choose the desired option on the
SETUP menu, then use bb/BBto choose the
desired setting.
FUNCTION OSD
The DVD+VCRon-screen displays can be turned on or off.
Press b/Bto set FUNCTION OSD to ON or OFF.
LANGUAGE SELECT
The DVD+VCR on-screen menus can be displayed in English,
Spanish, or French.
Press b/Bto set LANGUAGE SELECT to ENGLISH, SPAN-
ISH or FRENCH.
AUDIO MODE
The DVD+VCR has two separate audio playback systems: 1)
High-quality VHS Hi-Fi system, and 2)NORMAL mono system.
The same audio is generally recorded on both systems. The
VHS Hi-Fi system plays on separate (left and right) channels,
and the NORMALsystem plays monaural sound. The normal
track is always played so the cassette can be played on a
DVD+VCR that does not have VHS Hi-Fi.
Press b/Bto set AUDIO MODE to HI-FI or NORMAL.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAPsignals are
received. When only one of the MTS signals is received, the
DVD+VCR automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For
normal operation, the display should be in the STEREO position.
The DVD+VCR will then record a STEREO program when available,
and record a mono program IF the program is NOTIN STEREO.
For weak STEREO and/or SAPbroadcasts, changing the dis-
play to mono may give clearer sound.
Press b/Bto set BROADCASTTYPE to STEREO, SAP, or
MONO.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUTterminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
Press b/Bto set AUDIO OUTPUTto STEREO, LEFT, or
RIGHT.
44
Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in “Connecting Antenna/Cable
TV to DVD+VCR” on page 11.

AUTO CHANNEL PROGRAMMING

11
Press MENU to display the MAIN menu.
22
Use vv/VVto select the TUNING menu, then press
ENTER.
The TUNING menu will appear.
33
Press VVto choose the SOURCE SELECT option,
then use bb/BBto select TUNER.
Press b/Brepeatedly to select TUNER, LINE1 or LINE2.
44
Use vv/VVto choose the AUTOCHANNEL SET option,
then use bb/BBto search for channels.
The tuner will automatically scan for all available
channels in your area and place them in the tuner’s
memory.
55
When AUTO CHANNELSET is complete, make
sure TUNING BAND is set appropriately (TV or
CATV) in the TUNING menu.
Remember, TV is for over-the-air antenna recep-
tion, and CATV is for cable or wireless connection.
66
Press MENU to return to the TV screen.
77
Use CH/TRK (vv/VV) or CH (vv/VV) on the front
panel to cycle the DVD+VCR through the
channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels in
memory manually.
1Use VVto choose the CH. ADD/DEL option on the
TUNING menu. Use b/Bto select a channel to add
or erase.
2Use ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3Press MENU to return to the TV screen.