GoVideo DV1130 manual DVD Operation Playing DVDs, General Features

DVD Operation

Playing DVDs

Playback Setup DVD

Turn on the TV and select the video input source con- nected to the DVD+VCR.

Audio system: Turn on the audio system and select the input source connected to the DVD+VCR.

Set the DVD+VCR output source to DVD as shown in “Selecting the Viewing Source” on page 6.

1Press EJECT (Z) to open the disc tray.

2up.

When a double-sided DVD is inserted, make sure the side you want to play is facing down.Load the disc in the tray with the label facing

3“LOAD” appears on the front panel display, and playback starts automatically. If playback does not

start, press PLAY ( B).

In some cases, the disc menu may appear instead.Press EJECT (Z) to close the tray.

If a menu screen is displayed

If the DVD has a disc menu, it may be displayed when the disc is loaded.

DVD

Use the b/B/v/V buttons to select the title/chapter you want to view, then press ENTER to start

playback.

Press TITLE or DISC MENU to return to the menu screen.

otes

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see Parental Control, on page 21).

DVDs may have a Region Code. Your DVD+VCR will not play discs that have a Region Code different from your DVD+VCR. The Region Code for this DVD+VCR is 1 (one).

Do not keep a fixed image displayed on the screen for a long time.

Screen Saver

The screen saver picture appears when you leave the DVD+VCR in Stop mode for about five min- utes.

General Features

ote

Unless otherwise stated, all operations described below use the remote control. Some features may also be available in the Setup menu.

Moving to another TITLE	DVD
		1/3

When a disc has more than one title, you can move to another title as follows:

Press DISPLAY in Stop mode, then press the appropriate number buttons (0-9) and press ENTER to select the desired title number.

Moving to another CHAPTER

DVD 1/12

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter as follows:

Press REW (.) or FF (>) briefly during playback to return to the beginning of the

current chapter or to select the next chapter. Press REW (.) twice briefly to step back to the previous chapter.

To go directly to any chapter during playback, press DISPLAY. Use v/V to select C (chapter). Then, enter the chapter number with the number buttons (0-9). Then, press ENTER.

Slow Motion DVD

1Press PAUSE/STEP (X) during playback. The DVD+VCR will go into Pause mode.

2Press REW (.) or FF (>) during Pause mode.

The DVD+VCR will enter Slow mode.

3Use REW (.) or FF (>) to select the desired speed: t 1/16, t 1/8, t 1/4, t 1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2 (forward).

4To return to normal playback, press PLAY ( B).

28