52
The Tracking adjustment removes the white lines that sometimes
appear during playback because of slight differences in recording
decks. The AUTO button will automatically align the recorded
tracks with the playback heads to solve this problem. You may also
set tracking manually.

1Adjust Tracking Manually

During playback, press the TRACK+/- buttons to remove white
lines from the picture.
1
1
While a videotape is playing, you can enjoy a variety of special
playback features, including Still, Frame Advance, Skip, Repeat, and
more. Press the PLAY/PAUSE button again to resume normal
playback.

1Still

From Play mode, press PLAY/PAUSE to still a single frame.

2Frame Advance

From Still mode, press F.ADV/SKIP to advance to the next frame.

3Cue/Review

From Play mode, press FF
or REW
¦¦
to cue/review at two
speeds:
•Picture Search — Press and release to advance the tape
forward or backward at 5 times normal speed.
•Jet Search — Press and hold to advance the tape forward or
backward at 7 times normal speed.

4Skip

From Play mode, press F.ADV/SKIP to cue ahead exactly 60
seconds. Press SKIP up to five times to cue ahead up to five
minutes.

5Repeat

•From Play mode, press REPEAT to review the last 30 seconds
of tape.

6Jog Shuttle

From Play mode, press JOG/SHUTTLE repeatedly to enable the
following modes:
•Shuttle mode (green light) — Rotate the Jog/Shuttle wheel
clockwise (FWD) to gradually increase the cue speed. Rotate
the wheel counter-clockwise (REV) to gradually increase the
review speed.
•Jog mode (red light) — Rotate the Jog/Shuttle wheel to advance
frame by frame forward and reverse.
•Off (no light) — The Jog/Shuttle wheel is disabled to prevent
accidental operation.
Special VCR Playback Features
Press the DISPLAY button to see the
current status of the VCR deck, as well
as the tape counter position and
record speed.
3
3
PLAY
0:00:00
SP
Tracking
6
4
2
1
5
6