GoVideo DV3130 manual VCR Setup, VHS Playback

VCR Setup

If you want your videotapes to play automatically when you insert them, turn on Auto Play.

NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted.

1Open “Initial Setup” menu

With the VCR in Stop or Play mode, press the SETUP button.

2Select “VCR”

Use the / buttons to highlight “VCR”, then press ENTER to select.

3Select “Auto Play”

Use the / buttons to highlight “Auto Play”, then press the

button to select from the following options:

•On - The VCR will automatically begin playing a videotape when it is inserted, as long as the record safety tab has been removed.

•Off - Auto Play is disabled.

4Select “Auto Repeat”

Use the / buttons to highlight “Auto Repeat”, then press the  button to select. Choose “On” if you want the VCR to

play tapes repeatedly (unless a playback control button is pressed, such as STOP, FF or REW).

5Select “Commercial Advance”

See page 61-62.

Auto Play :	On
Auto Repeat :	Off
Commercial Advance

Auto Play		: On
	Auto Repeat	: Off
Commercial Advance

On Off

Off On

S-VHS Playback

The DVD+VCR allows you to playback high quality S-VHS tapes.

1Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2Start Playback

Press PLAY/PAUSE on the remote control to begin playback of the S-VHS tape.

53