GoVideo DVP950 Rear Panel, Plug into the power source, Connect to a TV with RF coaxial inputs

Models: DVP950

1 38
Download 38 pages 56.61 Kb
Page 11
Image 11

Rear Panel

DVD/VHS OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV or A/V receiver with video and audio inputs.

VHS IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR).

AC Power Cord

Plug into the power source.

ANTENNA INPUT

Connect the VHF/UHF/CATV antenna to this terminal.

COAXIAL (DVD digital audio out jack) Connect to digital (coaxial) input on audio equipment.

AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system.

INTRODUCTION

RF OUT(DVD/VHS OUT)

Connect to a TV with RF coaxial inputs.

S-VIDEO OUT (DVD OUT)

Connect this terminal to the S-Video Input on a

TV or A/V Receiver.

VIDEO OUT (DVD OUT)

Connect to a TV with video input.

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

11

Page 11
Image 11
GoVideo DVP950 manual Rear Panel, Plug into the power source, Connect the VHF/UHF/CATV antenna to this terminal