Connections (Continued)
Basic TV Connections
Make one of the following connections, depending on the capabilities of your existing equipment.
Due to Macrovision encoding, you may not be able to view DVDs when connecting the DVD+VCR to a TV/VCR combination unit.
RF coaxial connection
Connect the RF OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied
Note
If you use this connection, tune the TV to the DVD+VCR’s RF output channel (CH 3 or 4). The default setting is channel 3.
How to set the DVD+VCR’s RF output channel
When the DVD+VCR is turned off, press and hold CH (v or V) on the front panel for about five seconds to toggle the RF output channel between CH 03 and CH 04. The “RF 03” or “RF 04” is displayed on the display window.
Audio/Video connection
1DVD+VCR to the video in jack on the TV using the supplied video cable (V).Connect the DVD/VHS VIDEO OUT jack on the
2 Connect the Left and Right DVD/VHS AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.
Note
If you use this connection, set your TV’s input source to VIDEO.
Rear of TV
AUDIO INPUT | VIDEO | ANTENNA | |
|
| INPUT | INPUT |
L | R |
|
|
Optional TV Connections
Notes
You can ONLY watch and listen to DVD playback through one of the following connections.
Audio/Video connection
1 Connect the VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the video cable supplied (V).
2the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).Connect the Left and Right AUDIO OUT jacks of
S-Video connection
1to the
2the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).Connect the Left and Right AUDIO OUT jacks of
Rear of TV
AUDIO INPUT | VIDEO | |||
INPUT | INPUT | |||
|
| |||
| L | R | L | |
S | A2 | V |
PREPARATION
A1 V R
Rear of DVD+VCR
Rear of DVD+VCR
13
