Operation
Operation
Once the Matrix system is installed, you can verify that the Transceiver is functioning correctly by observing each component’s indicator lights. Once verified, no additional service or maintenance is necessary.
M
L
|
| K |
|
| J |
|
| H |
|
| FIG. 13 |
Transceiver See FIG. 13 |
|
|
|
| |
|
| |
Function | Description | |
|
| |
Power - Green light (H) | When lit, indicates the unit is receiving AC power. | |
|
| |
PC IN - Red light (J) | Flashing light indicates transmission from the PC to the Transceiver. | |
|
| |
PC OUT - Red light (K) | Flashing light indicates transmission from the Transceiver to the PC. | |
|
| |
RF IN - Red light (L) | Flashing light indicates RF signal received from Matrix or other RF source. | |
|
| |
RF OUT - Red light (M) | Flashing light indicates valid Matrix RF signal data transmitted. | |
|
| |
PC IN & RF OUT flashing (J & M) | Data from PC is being sent out via RF. | |
|
| |
PC OUT & RF IN flashing (K & L) | Valid data received by Transceiver and sent to the PC. | |
|
|
|
Transceiver Diagnostics
Indicator | Diagnostic Definition |
|
|
No green power | Indicates that AC power is not being received. Verify that the power cord is securely plugged into |
light (H) | the component and the AC power outlet. |
|
|
| Verify that the AC power outlet is “live”. |
|
|
No light on PC | Indicates that the PC is not communicating. Verify that the computer cable is securely plugged into |
IN (J) | the back of the Transceiver and the communications port of the PC. Complete the Signal Strength |
| Test on the Matrix Application screen to verify signal from the PC to the Transceiver. |
|
|
No light on PC | Indicates that the Transceiver is not communicating to the PC when receiving information from |
OUT (K) | other Matrix components. Verify that the RF IN indicator is lit. If lit, verify computer cable is securely |
| connected. If so, replace Transceiver. |
|
|
No light on RF | Indicates no transmission is being received by the Transceiver. Components may be too far out of |
IN (L) | range for proper RF communications. Verify Matrix components are programmed, have power, are |
| functioning correctly, and are within RF communication range. Replace Transceiver if all other com- |
| ponents are working properly and are within appropriate distance. |
|
|
Constant RF | System is in a RF communication “lock up”. Applies to all. |
OUT (M) light |
|
on |
|
|
|
No light on RF | No RF communication transmitted from Transceiver to the Matrix system. Verify that the computer |
OUT (M) | cable is securely plugged into the back of the Transceiver and the communications port of the PC. |
| Complete the Signal Strength Test on the Matrix Application screen to verify signal from PC to the |
| Transceiver and RF OUT from Transceiver. |
|
|
309498H | 13 |
