Gun Placement
Change Trigger Position
Removal
1.Remove both hand grips from handle bar (spraying compressed air into end of handle grip works well for this).
Installation
1.Route trigger wire to other side of handle bar. Make sure wire is routed behind steering column, through wire slot on steering plate, and into wire clamp on handle bar.
ti18988a
2.Use an allen wrench to loosen bolt on trigger mount- ing clamp.
ti18989a
3. Remove trigger assembly from handle bar.
ti18990a
ti18993a
2. Install trigger assembly onto desired handle bar.
ti18991a
3.Use allen wrench to tighten bolt on trigger mounting clamp.
ti18992a
4. Replace hand grips.
ti19254a
16 | 3A2090A Operation |
