Graco 308652Y Contents, Warning Symbol, Caution Symbol, Equipment Misuse Hazard

Contents

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Parts Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Service Kit Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Parts Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Parts Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Torque Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Dimensions and Mounting Hole Layout . . . . . . . . . . . 20

Performance Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Graco Standard Warranty . . . . . . . . . . . . . . . . . . . . . . 24

Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

EQUIPMENT MISUSE HAZARD

Any misuse of the equipment or accessories, such as overpressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or damaged parts, can cause them to rupture and result in splashing in the eyes or on the skin, other serious injury, or fire, explosion or property dam- age.

DThis equipment is for professional use only. Observe all warnings. Read and understand all instruction manuals, warning labels, and tags before you operate this equipment. If you are not sure, or if you have questions about installation or operation, call your Graco distributor.

DNever alter or modify any part of this equipment; doing so could cause it to malfunction. Use only genuine Graco part numbers and accessories.

DCheck all equipment regularly and repair or replace worn or damaged parts immediately.

DNever exceed the recommended working pressure or the maximum air inlet pressure stated on your pump or in the Technical Data on page 19.

DDo not exceed the maximum working pressure of the lowest rated component in your system. This equipment has a 100 psi (0.7 MPa, 7 bar) maximum working pressure at 100 psi (0.7 MPa, 7 bar, ) maximum incoming air pressure.

DBe sure that all fluids and solvents used are chemically compatible with the wetted parts shown in the Technical Data on page 19. Always read the manufacturer’s literature before you use fluid or solvent in the pump.

DNever move or lift a pump under pressure. If dropped, the fluid section may rupture. Always follow the Pressure Relief Procedure on page 8 before you move or lift the pump.

DNever use a polypropylene or PVDF pump with non-conductive flammable fluids as specified by your local fire protection code. Refer to Grounding on page 4 for additional information. Consult your fluid supplier to determine the conductivity or resistivity of your fluid.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being pumped.

2 308652