Graco 312359J important safety instructions System Setup Screens, Set Potlife/Hose Length

Appendix A

System Setup Screens

System Setup enables users to configure system set- tings for fluid control and operator interaction. Refer to the following table for details.

NOTE:

System settings must be enabled from the Enable Setup screens before users can change or set configurations. See Enable Setup Screens, page 66, for instructions.

Icon Function

Set number of minutes before mixed mate- rial will set in hose. Resets after material volume set by user is passed through hose.

Indicates total hose volume. Always dis- played in cc units.

Set length of hose after mix manifold. Used to indicated total hose volume.

Set calendar date and format.

Set time.

Set units of measurement desired for dis- play, such as fluid and temperature.

Set sprayer number if using more than one sprayer.

Set number of hours of recorded data to record to USB data logs.

Set how often data will record to USB spray logs.

Select resin pump size for A side.

Select hardener pump size for B side.

Potlife/Hose Length

This screen enables users to set the potlife timer and enter the hose inside diameter and length of each mixed material hose specific to the system. The potlife time displays in the upper right corner.

Set Potlife/Hose Length

To set the potlife timer and enter the mixed material

hose dimensions, press and to move through

each field, and press to make a field selectable.

Press and to select preferred units of mea- surement for the potlife timer and length of each mixed

material hose. Press and to move to the next digit in each field. Once the measurement unit in

the field is correct, press	to save that measure-
ment.

When the fluid flow stops the displayed time counts down in one minute intervals. The timer automatically resets when the calculated mixed fluid volume is dis- pensed.

Date/Time/Units

This screen enables users to set day, time, and units that will be displayed on each screen.

64 312359J