Graco 3A1334E important safety instructions Operation

Operation

5.Examine follow plate to make sure rubber grommet

(c)is in place in center of the plate (FIG. 7).

7.Insert pump drop tube through center of rubber grommet in follow plate (FIG. 9).

Se

c

FIG. 7

6.Set follow plate on top of fresh grease (FIG. 8). Remove air by pushing on the follow plate until the grease level is flush with the opening in the middle of the follow plate (d).

d

FIG. 9

8. Tighten thumb screws (a) to secure cover to drum.

a

FIG. 8

FIG. 10

9. For the pump that is connected, trigger the dispens-

ing valve into a grounded metal waste container making firm, metal-to-metal contact between the container and the valve.

10. Slowly open the bleed-type master air valve and open the pump air regulator just until the pump is running. When the pump is primed and all air has been pushed out of the lines, release the trigger.

3A1334E 13