4.Visually inspect and make sure belts will be properly lined up when engine is tightened.
5.Tighten four nuts (5) and bolts (3) to secure engine in place. Visually inspect and make sure hydraulic belt is properly aligned. Repeat until proper align- ment is achieved.
3
5
ti17365a
6.Tighten four nuts (5) and bolts (12) so compressor is fairly level. Before completely tightening bolts, tension compressor belt (102) by shifting compres- sor to the right.
Compressor Belt and Hydraulic Pump Belt
9. Install side guard (105) by tightening eight screws.
105 
ti17368a
10.Install top fan guard (104) by tightening four bolts (14) and nuts (15).
15
104
14
15 | ti17367a |
|
11.Install front belt guard (107) by tightening three screws (1) and two nuts (15) and bolts (22).
22
ti17370a
7.Tighten four nuts (5) and bolts (12) to secure com- pressor in place.
15
107
ti16828a
ti17370a
8.Install two screws securing muffler bracket to engine.
12.Install top belt guard (108) by tightening four screws
(1) and two nuts (15).
1 |
|
ti16829a |
|
1 | 108 |
|
13.Install the air line (145) to the compressor.
145 
ti17361a
ti17366a
3A1696C | 11 |
