Setup
Setup
Important
•If you are going to stop spraying for more than 5 minutes, turn sprayer off to prevent shortened pump hose life.
•Do not allow material to dry inside pump, hoses, gun or spray system.
4.Connect material hose to gun.
Texture Spraying (material supplied from unit)
When using material 
supplied from unit, insert the Gun Plug in the top of the gun. Hose plug must be removed from bottom of gun.
ti8701a
1.Connect air hose and material hose to sprayer air and material hose outlets.
ti8705a
5. Make sure burp guard is installed, Caution, page 3.
ti9010a
6.Install spray nozzle. See Recommended Nozzle Selection Chart, Page 11.
| ti9216a |
| ti8706a |
2. Open air valve. | 7. Fill material hopper with 1 gallon of water. |
ti8528a | ti9215a |
| |
3. Connect air hose to gun. | 8. Turn hopper gun/spray gun selector switch to |
| SPRAY GUN. |
ti8534a
ti9219a
7
