Graco Infant Restraint/Carrier manual Adjusting Handle, Removing and Attaching Infant Restraint

4.1 Adjusting Handle

1. Press handle adjustment buttons on both sides of handle .

2.Rotate handle until it clicks into any of the

4 positions:

Position A: MUST be used

when carrying by handle,

Position B,C: are convenience positions,

Position D: is the sitting position,

NEVER use position B in the vehicle.

BOTH handle adjustment buttons must pop out to lock handle in place .

3.Push and pull on the handle to be sure it is locked firmly in position.

Carrying

A B

C

D Sitting

4.2 Removing and Attaching Infant Restraint

To remove, squeeze release handle at back of infant restraint and lift out of base as shown .

To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.

16