5.0 Using Infant Restraint

5.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. The harness straps must be properly adjusted to fit your child according to the following instructions.

1.Remove infant restraint from base and rotate handle down to sitting position.

See “4.1 Adjusting Handle” and “4.2

Removing and Attaching Seat”, page. 16.

2. Place child in infant restraint as shown .

3.Determine which pair of harness slots are even with or just below your

child’s shoulders .

4. If the harness straps must be adjusted: remove child from infant restraint and move harness straps

to the proper harness slots by doing the following:

Use harness slots

even with or just below

child’s shoulders

20

Page 20
Image 20
Graco Infant Restraint/Carrier Positioning Harness Straps, Place child in infant restraint as shown, Child’s shoulders