Graco Infant Restraint/Carrier manual Additional Information, Airplane Use, Storing Latch

Models: Infant Restraint/Carrier

1 88
Download 88 pages 15.93 Kb
Page 41
Image 41

8.1 Airplane Use

Install in an airplane the same way as

in an automobile with a lap only belt. Notify the airline ahead of time that you intend to bring the seat on board.

Use only in forward-facing aircraft seat. Follow the flight attendants instructions about infant restraint placement. Do not use this infant restraint if the airplane seat belt does not hold the infant restraint securely.

8.2 Storing LATCH

1. For ease of storing, extend LATCH to its maximum length.

2. Locate the storage bars on bottom of infant restraint base .

3.Fasten connector (without adjustment belt) onto storage bar.

Storage bars

4. Repeat step 3 for connector with adjustment belt. After fastening onto storage bar, pull on adjustment belt to make sure LATCH is securely fastened.

5. LATCH storage should look like this when complete .

Underside of base

8.0 Additional Information

41

Page 41
Image 41
Graco Infant Restraint/Carrier manual Additional Information, Airplane Use, Storing Latch