Graco Infant Restraint/Carrier From behind seat, pull the metal, Harness straps must be through

A. Push the harness adjustment button under the seat flap. Pull the shoulder straps out to loosen the harness .

B. From behind seat, pull the metal

junction plate down behind the owner’s
manual pocket and remove the ends of
the two shoulder straps from the metal
junction plate .
C. From front, pull straps through the	Harness adjustment
harness slots and then reinsert them
	button
through the appropriate slots. Both
harness straps must be through the
same set of slots in the seat and pad.

D. From behind seat, push both shoulder straps UNDER owner’s manual pocket and out the bottom .

E. Depending on the size of your child, you
may need to adjust the harness straps or
waist straps as shown on pages 23-24.
Reassemble the strap ends onto the metal
junction plate . You will be able to use
various combinations of shoulder strap	Metal junction
loops and waist strap loops to get a snug
fit for your child.	plate

5.SAFETY CHECK:

a)CHECK that straps are not twisted in front or back;

b)CHECK that straps are secure by pulling on harness straps from the front of the seat.

21