Additional | information |
|
|
Additional information
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
Symptom | Possible cause | Remedy | |
|
|
|
|
Power does not come on. | Power plug is not inserted securely. | Plug in securely. | |
|
|
|
|
Remote control does not work. | Too far from the unit. | More closer to the unit. | |
|
|
|
|
|
| The tip of the remote unit is not | Point the infrared light- emitting window |
|
| pointed in the right direction. | toward the remote sensor on the front panel. |
|
|
|
|
|
| Batteries are exhausted. | Replace the batteries with new ones. |
|
|
|
|
|
| Battery polarity is incorrect. | Take out the batteries and insert them again |
|
|
| in the correct direction. |
|
|
|
|
The | The | To control the unit, set the | |
CURSOR or numeric buttons do | set. | “DVD”. To control your TV, set the | |
not work. |
| switch to “TV”. | |
|
|
| |
No picture is displayed on the | Connection of video cable is | Connect the cable correctly. | |
monitor. | incorrect. |
| |
|
|
|
|
|
| Input selection of TV is incorrect. | Select correctly. |
|
|
|
|
|
| Disc is not playable. | Use a playable disc. (See page 12.) |
|
|
|
|
|
| The SCAN MODE is set to “525p” | Set the SCAN MODE correctly. |
|
| though the unit is connected to a TV |
|
|
| via the VIDEO output jack. |
|
|
|
| |
Picture is noisy or blurred. | The unit is connected to a VCR | Connect the unit so that the picture signal | |
|
| directly and the copyguard function | flows directly to the TV. |
|
| is activated. |
|
|
|
|
|
|
| With some discs, a picture may be | Set the “PROGRESSIVE MODE” to “VIDEO”. |
|
| blurred when setting the |
|
|
| “PROGRESSIVE MODE” to “FILM” |
|
|
| or “AUTO”. |
|
|
|
| |
No audio is reproduced. | Connection is incorrect. | Check the connections. | |
|
|
|
|
|
| Input selection of amplifier is | Select correctly. |
|
| incorrect. |
|
|
|
| |
No audio is reproduced when | The audio signal derives from the | Use the ANALOG AUDIO OUT when playing | |
playing back a DVD disc | unit's DIGITAL AUDIO OUT. | back such discs. | |
recorded with |
|
| |
|
| ||
audio. |
|
| |
|
|
| |
Sound is distorted or noise is | Disc is dirty. | Wipe the disc surface. | |
generated. |
|
| |
|
|
| |
Picture is garbled. | The screen saver mode is set to | Set the screen saver mode to the other mode. | |
|
| “MODE 1”, and the screen saver |
|
|
| function is activated. |
|
|
|
| |
Picture does not fit the television | “MONITOR TYPE” is not correctly | Select monitor type correctly. (See page 41.) | |
screen. | set. |
| |
|
|
|
|
|
| Television is not correctly set. | Set the television correctly. |
|
|
| |
Operation is not possible. | Microcomputer malfunctions due to | Turn off the power and unplug the power | |
|
| lightning or static electricity. | cord, then connect the power cord again. |
|
|
|
|
|
| Moisture condensation occurs by a | Turn off the power, then turn it on a few |
|
| sudden change of temperature or | hours later. |
|
| humidity. |
|
|
|
|
|
51
