JVC XV-D721BK To connect the unit‘s Digital output to an, External device equipped, Correctly

DIGITAL AUDIO OUTPUT DOWN MIX COMPRESSION

DTS BASS MANAGEMENT AUTO STANDBY SCREEN SAVER

AV COMPULINK MODE

SELECT KEY

PREFERENCE1 PREFERENCE2 SPK. SETTING

STREAM/PCM

Lt/Rt

OFF

OFF

OFF

OFF

DVD1

Setting and adjustment

PROGRESSIVE MODE

You can select the progressive mode from the following options.

PREFERENCE1	PREFERENCE2	SPK. SETTING
MENU LANGUAGE		ENGLISH
AUDIO LANGUAGE		ENGLISH
SUBTITLE		OFF
ON SCREEN LANGUAGE		ENGLISH
ON SCREEN GUIDE		ON
MONITOR TYPE		16:9 AUTO
PROGRESSIVE MODE		AUTO
SELECT	KEY

The following chart shows the relationship between types of playback discs and digital audio output signals.

Playback discs	Digital audio output
	STREAM/PCM DOLBY DIGITAL/PCM		PCM ONLY
DVD with 48/44.1-kHz,	48/44.1-kHz,	←	←
16-bit linear PCM/	16-bit stereo

•AUTO

The unit recognizes the picture type (film or video source) of the current disc according to the disc information.

•VIDEO 1

Suitable for playing back a video source disc with static (inactive) pictures.

•VIDEO 2

Suitable for playing back a video source disc with dynamic (active) pictures.

•FILM

Suitable for playing back a film or progressive source disc.

•SMART

Used to playback a disc containing both video and film source materials. The unit recoginizes the picture type according to the current data.

*Normally, set the PROGRESSIVE MODE to “AUTO”.

*Some DVD discs may not be played back correctly with the “AUTO” mode. If the playback picture is unclear or noisy with a particular DVD Video disc, try to change the mode.

NOTE

•When playing back a film-source DVD Video disc with the progressive mode set to “FILM”, “SMART” or “AUTO” and the SCAN MODE selector set to “525p”, the DIGITAL DIRECT PROGRESSIVE indicator on the front panel lights.

To set audio and other preference items

PREFERENCE 2 can be set as follows:

DIGITAL AUDIO OUTPUT
To connect the unit‘s
digital output to an	PREFERENCE1	PREFERENCE2		SPK. SETTING
external device equipped
	DIGITAL AUDIO OUTPUT		STREAM/PCM
with a digital input, this	DOWN MIX			Lt/Rt
	COMPRESSION			OFF
item must be set	DTS BASS MANAGEMENT			OFF
	AUTO STANDBY			OFF
correctly.	SCREEN SAVER			OFF
	AV COMPULINK MODE			OFF
	SELECT	KEY

•PCM ONLY:

When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment.

•STREAM/PCM:

When you connect to the digital input of an amplifier with a built-in DTS or Dolby Digital decoder.

•DOLBY DIGITAL/PCM:

When you connect to the digital input of a Dolby Digital decoder, or an amplifier with built-in Dolby Digital decoder.

MLP	linear PCM
DVD with 48/44.1-kHz,	48/44.1-kHz,	←	←
20/24-bit linear PCM/	20-bit stereo
MLP	linear PCM
DVD with 96/88.2-kHz,	No output	←	←
linear PCM/MLP
DVD with 192/176.4-	No output	←	←
kHz, 16/20/24-bit
linear PCM/MLP
DVD with DTS	DTS bitstream	48-kHz, 16-bit	←
		linear PCM
DVD with Dolby	Dolby Digital	←	48-kHz, 16-bit
Digital	bitstream		linear PCM
DVD with MPEG	MPEG	48-kHz, 16-bit	←
multichannel	bitstream	linear PCM
Video CD	44.1-kHz, 16-	←	←
	bit linear PCM
Audio CD	44.1-kHz, 16-	←	←
	bit linear PCM
Audio CD with DTS	DTS bitstream	44.1-kHz, 16-	←
		bit linear PCM

DOWN MIX

To playback a DVD Video disc recorded with surround multichannel audio correctly, the DOWN MIX setting must be properly made according

to your audio system.

Note that this setting affects only the output signal from the ANALOG AUDIO output jacks when playing back a DVD Video disc recorded with surround multichannel audio.

•Lt/Rt

When you enjoy multichannel surround audio by connecting the unit’s ANALOG AUDIO outputs to a surround decoder.

•Lo/Ro

When you enjoy conventional 2-channel stereo audio by connecting the unit’s ANALOG AUDIO output(s) to a stereo amplifier/receiver or television set, or when you record audio of a DVD Video disc recorded with surround audio to your MD, cassette, etc.

•OFF

When you enjoy multichannel surround audio by connecting the unit’s 5.1-channel audio outputs to an amplifier equipped with 5.1-channel inputs.

NOTES

•The DOWN MIX function does not work when the 3D PHONIC function is activated.

•Some DVD Audio discs prohibit the 2-channel down-mix. For such a disc, you cannot get the down-mixed signal even if you set “DOWN MIX” to “Lt/Rt” or “Lo/Ro”.

Setting and adjustment

42