JVC XV-D721BK manual Getting started, Connections, Before making any connections, Unit

Getting started

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a normal TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.)

Getting started

The unit

FRONT		REAR	CENTER
LEFT	LEFT
RIGHT	RIGHT
ANALOG			SUBWOOFER
DIGITAL	PCM/STREAM		VIDEO	S-VIDEO	Y	PB	PR	SCAN MODE
OPTICAL		COAXIAL						525p	525i
						COMPONENT
	AUDIO OUT		AV COMPU LINK				VIDEO OUT

*If the TV has an AV COMPU LINK terminal, see “AV COMPU LINK remote control system” on page 49.

Set to “525i”

Red YellowS-video cable (supplied)

White Yellow

White

Red

Audio/video cable (supplied)

TV

IN

S-VIDEO

VIDEO

LEFT

AUDIO

RIGHT

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S- video cable in addition to the (standard) video connection to get better picture quality.

NOTES

•When connecting to a TV using the VIDEO jack, set the SCAN MODE selector to “525i”. Otherwise, you cannot get any picture.

•When making the audio connection using the FRONT (LEFT and RIGHT) jacks, set “DOWN MIX” in “PREFERENCE 2” to “Lo/ Ro” and the Speaker setting in “SPK. SETTING” to “2 CHANNEL”. See pages 42 and 44.

•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

13