Graco ISPC094CB owner manual Safety Check

Metal junction

plate

Harness adjustment

button

A. Push the harness adjustment button under the seat flap. Pull the shoulder straps out to loosen the harness ➌.

B. From behind seat, pull the metal junction plate down behind the owner’s

manual pocket and remove the ends of the two shoulder straps from the metal junction plate ➍.

C. From front, pull straps through the harness slots and then reinsert them through the appropriate slots. Both harness straps must be through the same set of slots in the seat and pad.

D. From behind seat, push both shoulder straps UNDER owner’s manual pocket and out the bottom ➍.

E. Depending on the size of your child, you may need to adjust the harness straps or

waist straps as shown on pages 22-23. Reassemble the strap ends onto the metal junction plate ➍. You will be able to use various combinations of shoulder strap loops and waist strap loops to get a snug fit for your child.

5. SAFETY CHECK:

a) CHECK that straps are not twisted in front or back; b) CHECK that straps are secure by pulling on harness straps from the front of the seat.

➌

➍

21