VEHICLE SEAT BELTS (continued)
1Install child restraint and tighten vehicle seat belt.
2Hold seat belts together at latch plate (fig. a) then unbuckle.
3Slide locking clip on seat belts appoximately 1/2 inch (1 cm) and up to 1 inch away from latch plate.
4
5Test installation to see if child restraint is secure.
If not secure, additional belt tightening may be required:
•Unbuckle vehicle seat belt.
•Hold belts together and remove locking clip.
•Shorten length of lap belt portion slightly by pulling belt through latch plate
•
• Buckle vehicle seat belt. | |
|
Press child restraint further down into vehicle seat cushion to help buckle vehicle seat belt.
Test installation to see if child restraint is secure. If not secure, repeat above step until secure.
within 1”
(2 cm)
