REAR-FACING Installation with Vehicle Seat Belts

REAR-FACING INSTALLATION WITH VEHICLE SEAT BELTS

WARNING

LATCH belt MUST be stored when using vehicle seat belt to install child restraint.

Please refer to p.44, “Vehicle Seat Belts” to determine what type of vehicle seat belt is in your vehicle.

1.Store LATCH belt as shown (a). Recline ﬂip foot must be in REAR-FACING position (b).

2.Place rear-facingon vehicle seat.

3.Thread vehicle seat belt through rear-facingopenings under the seat pad and buckle belt (c). Be sure to route the vehicle seat belt in between

a b

c d

the harness buckle slots (d). Press down ﬁrmly in center of child restraint to compress vehicle seat cushion while tightening vehicle seat belt (e).