Adjusting Head Support
•BEFORE adjusting the head support height, have your child lean forward slightly.
•Squeeze and pull up the red head support adjustment handle (a) on top of seat until it locks into one of the
8 height positions. There will be an audible click and the red head support adjustment handle will return to its original position (b).
•To lower, squeeze red head support adjustment handle and push head support down.
•When head support is in lowest position, always pull flap forward as shown. (c).
Rear-facing
•Head support should be positioned so the harness straps are at or just below the shoulders.
•Make sure the head support does not touch the front vehicle seat.
Forward-facing
•Head support should be positioned so that the harness straps are at or just above the child’s shoulders.
Refer to page 28 for harness strap placement.
a 
CLICK!
b
Flap
c
29
