5.Press down firmly in center of child restraint to compress vehicle seat cushion while tightening vehicle seat belt (d).
6.Hold seat and pull front to back and left to right at belt path to check for secure installation (e). The child restraint should not move side to side or forward more than 1 inch (2.5 cm). Vehicle lap belt MUST stay tight. If not secure, see “Vehicle Seat Belts” pg. 44.
7.Attach tether strap hook (A) to anchor hardware (B) and tighten adjustment belt to remove any slack (f). If vehicle does not have anchor points to attach tether hook, tether hook should be stored, see “Tether Storage”, page 52. Belt must lay flat and not be twisted. Periodically check that child restraint is securely installed; adjust if necessary.
d 
e
A
B | Pull to |
f | Tighten |
Tether
Installation with
Lap/ Shoulder
belt
27
