Graco PD268712B owner manual

4.Hold seat and pull front to back and left to right at the belt path to check for secure installation. (f). The child restraint should not move side to side or forward more than 1 inch (2.5 cm).Vehicle lap belt MUST stay tight. If not secure, see “Vehicle Seat Belts”page 44.

5.Check level indicator on child restraint. Vehicle must be on level ground and child in child restraint when

checking level indicator.

6.Ball MUST be entirely in blue zone (g). If necessary, place rolled towels under child restraint, at vehicle seat crease (h), until entire ball is in blue zone. Then re-check level indicator (see page 37).

DO NOT use tether rear-facing. Tether must be stored (see “Tether Storage” page 52). Periodically check that child restraint

is securely installed and properly leveled; adjust if necessary.

Towel

h

f

g

25