System Accessories

Installation

System Accessories

Cover Mount CAUTION

Do not hang the air accessories directly on the air inlet (E). The fittings are not strong enough to support the accessories and may cause one or more to break. Provide a bracket on which to mount the accessories.

NOTE: Install the accessories in the order shown in Fig. 1.

Wall Mount WARNING

Four accessories are required in your system: an air shut-off valve/air bleed device, fluid drain valve, thermal relief kit, and ground wire. These accesso- ries help reduce the risk of serious bodily injury including fluid injection, splashing in the eyes or on the skin, injury from moving parts if you are adjust- ing or repairing the pump, and explosion from static sparking.

The air bleed device relieves air trapped between it and the air motor after the air supply is shut off. Trapped air can cause the air motor to cycle unex- pectedly, causing serious bodily injury if you are adjusting or repairing the pump. Use either a bleed-type master air valve (A) or a quick-discon- nect coupler (M) and fitting (L). Install near the pump air inlet, within easy reach of the pump.

The fluid drain valve (H) assists in relieving fluid pressure in the displacement pump, hoses and dispensing valve. Triggering the valve to relieve pressure may not be sufficient.

The thermal relief kit assists in relieving pressure in the pump, hose, and dispensing valve due to heat expansion.

The ground wire reduces the risk of static sparking.

1.Screw the muffler (5) into the 3/4-in. npt muffler port, and tighten it using a wrench on the flats of the muffler near the male threads.

2.Install an air line lubricator (N) for automatic air motor lubrication.

3.Install the air regulator (C) to control pump speed and pressure.

4.Install an air line filter (B) to remove harmful dirt and contaminants from your compressed air supply.

5.Install a bleed-type master air valve (A) to isolate the accessories for servicing. See Fig. 1. To order a bleed-type master air valve, order Part No. 107142.

As an alternative to a bleed-type master air valve, you can install an air line quick disconnect coupler

(M) and fitting (L) to serve as an air-bleed device. See Detail A in Fig. 1.

6.Install a drain valve (H) near the pump fluid outlet to relieve fluid pressure in the hoses and gun when opened. To order a fluid drain valve, order Part No. 210658.

7.Install a thermal relief kit (K) on the dispensing valve side of the pump. To order a 1600 psi

(110 bar, 11 MPa) thermal relief kit, order Part No. 240429.

8.Install a suitable fluid hose (P) and dispensing valve (J).

Cover Mount

For cover mounting, see the Mounting Hole Layout on page 18.

Wall Mount

The pump shown in Fig. 1 is wall mounted. To order the wall-mounting bracket, order Part No. 238245.

6 308608K

Page 5 Page 7
Page 6
Image 6
Graco Series D, 238108 important safety instructions System Accessories, Cover Mount, Wall Mount, 6 308608K, Installation
Page 5 Page 7

238108, Series D specifications

Graco 223177, Series D is a high-performance spray gun designed for professional-grade painting and finishing applications. This versatile tool is valued for its precision, efficiency, and user-friendly features, making it a favorite among contractors, painters, and DIY enthusiasts alike.

One of the standout features of the Graco 223177 is its innovative Airless technology. This technology eliminates the need for compressed air, allowing for a smooth and even spray pattern. This results in a finer finish with fewer overspray issues, saving time during cleanup and minimizing paint waste. The Airless system also ensures that the paint is atomized effectively, providing a flawless application that reduces the need for multiple coats.

The gun offers adjustable pressure control, enabling users to tailor the spray output according to specific project requirements. This feature is particularly beneficial when working with different materials, as it allows for precise control over the thickness of the paint being applied. The Graco 223177 can handle a wide range of coatings, including latex, oil-based paints, and stains, offering versatility for various applications.

The ergonomic design of the Graco 223177 enhances user comfort during extended use. It is lightweight and features a comfortable grip, reducing hand fatigue. The design also includes an integrated filter that prevents clogs, ensuring consistent performance without interruptions. Additionally, the gun's easy-to-clean components streamline maintenance, allowing users to quickly prepare for their next task.

Another notable characteristic of the Graco 223177 is its durability. Built with high-quality materials, this spray gun is designed to withstand the rigors of daily use while maintaining its performance standards. It is compatible with a range of spray tips, offering flexibility in terms of spray patterns and widths, catering to the needs of different projects—from large surfaces to intricate details.

In conclusion, the Graco 223177, Series D stands out for its advanced Airless technology, adjustable pressure control, ergonomic design, and durability. These features make it an ideal choice for professionals seeking efficiency and quality in their painting tasks, as well as for homeowners looking to achieve a professional finish. With its broad capabilities, the Graco 223177 is a reliable tool that enhances productivity and delivers excellent results across various painting applications.
Top Page Image Contents