Hose Reel
Installation
1. Grease shaft.
ti13537a
2.Make sure two washers and wave spring are on hub before hose reel is installed.
ti13545a
6.Install hose to swivel. Make sure to route hose through side arm of hose reel.
ti13539a
7.Turn hose reel clockwise to wrap up hose. Make sure hose is routed through hose guide.
3. Install hose reel onto frame. Place |
| |
and frame to allow snap ring to fit into place. Install | ti13504a | |
snap ring. | ||
|
ti13536a
4. Install swivel.
ti13543a
5. Install
ti13538a
38 | 3A0157B |
