Graco Inc 233708, 233702 Pinion Assembly/Rotor/Field/Shaft/Clutch, Bottom View, Removal, 8699A

Pinion Assembly/Rotor/Field/Shaft/Clutch

Removal

If pinion assembly (19) is not removed from clutch housing (5), do 1. through 4. Otherwise, start at 5.

1.

Relieve pressure; page 5.

2.Remove drive housing; page 9.

3.Disconnect field cable (X) from pressure control, and gallon counter sensor at (A).

72

17

E

Fig. 6 8701B

A

Fig. 4	X	Bottom View
		8699A

4.Fig. 5. Remove five screws (10) and lockwashers (17) and pinion assembly (19).

10

17

19

10

Fig. 5	17
	8700A

5.Fig. 6. Place pinion assembly (19) on bench with rotor side up.

6.Remove four screws (72) and lockwashers (17). Install two screws in threaded holes (E) in rotor. Alternately tighten screws until rotor comes off.

10 309409