Graco Inc 233706, 233702, 233701, 233700, 5900 Clutch Housing, Engine, Removal, Installation, 309409

Clutch Housing

Removal

1.Fig. 11. Remove four capscrews (73) and lock- washers (77) which hold clutch housing (5) to engine.

75

2.Remove screw (15) from under mounting plate (D).

3.Remove engine key (7).

4. Pull off clutch housing (5).

Installation

1.Fig. 11. Push on clutch housing (5).

2.Install four capscrews (73) and lockwashers (77) and secure clutch housing (5) to engine. Torque to 200 in-lb (22.6 NSm).

77

73

D

15

3. Install capscrew (15) from beneath mounting Fig. 11 8708A

plate (D). Torque to 26 ft-lb (35.2 NSm).

Engine

Removal

1.Remove Pinion Assembly/Rotor/Field/Pinion/ Clutch, Clamp and Clutch Housing, as in- structed on pages 10, 12 and 13.

2.Fig. 12. Disconnect all necessary wiring.

3.Fig. 13. Remove two locknuts (71) and screws (70) from base of engine.

4.Lift engine carefully and place on work bench.

NOTE: All service to the engine must be performed by an authorized HONDA dealer.

1	To the field
2	To the engine
3	To gallon counter

3

1

Green

2	8709A
Fig. 12

70

71

8710A

Fig. 13

Installation

1.Lift engine carefully and place on cart.

2.Fig. 13. Install two screws (70) in base of engine and secure with locknuts (71). Torque to 200 in-lb (22.6 NSm).

3.Fig. 12. Connect all necessary wiring.

4.Install Pinion Assembly/Rotor/Field/Pinion/ Clutch, Clamp and Clutch Housing, as instructed on pages 10 and 12 and 13.

309409 13