TYPICAL INSTALLATION
A
M
T
N
B C DO E
H
G
W
G
JP
R
K
FQ
L
U
V
NON±HAZARDOUS AREA | HAZARDOUS AREA |
Power Supply Must Be Interlocked
With Spray Booth Exhaust Fan.
S
X
WARNING
SIGN
KEY
A | Main Air Supply Line | J | Pump Ground Wire | Q | Spray Gun Ground Wire | |
K | Fluid Filter | R | Grounded Air Supply Hose | |||
B | Ventilation Fan Interlock Solenoid Valve | |||||
L | Fluid Supply Line Shutoff Valve | S | Electrostatic Spray Gun | |||
C | Main Air Supply Shutoff Valve (bleed±type) | |||||
M | Fluid Pressure Regulator | T | ES On±Off Valve Lever | |||
D | Air & Water Separator | |||||
N | Fluid Supply Line | U | Air Line Drain Valve | |||
E | Pump Air Supply Shutoff Valve (bleed±type) | |||||
O | Air Filter (5 micron) | V | Fluid Drain Valve | |||
F | Air Line Lubricator | |||||
P | Air Supply Line | W | Gun Air Inlet | |||
G | Air Pressure Regulator | |||||
| Shutoff Valve (bleed±type) | X | Gun Fluid Inlet | |||
H | Pump |
| ||||
|
|
|
|
The Typical Installation shown above is only a guide for selecting and installing electrostatic air spray systems. It is not an actual system design. The particular type and size system for your operation must be custom designed for your needs. For assistance in designing a system, contact your Graco representative.
Warning Signs
Mount warning signs in the spray area where they can easily be seen and read by all operators. See the ACCESSORIES section to order.
WARNING
Installing and servicing this equipment requires ac- cess to parts which may cause electric shock or other serious bodily injury if work is not performed properly.
Do not install or service this equipment unless you are trained and qualified.
Be sure your installation complies with National, State and Local codes for the installation of electrical apparatus in a Class 1, Group D, Divisions 1 and 2 Hazardous Location.
637638
