SERVICE
KEY
2Gun Handle
3a | Alternator | 5 |
3b | O±Ring |
|
3c | Plug |
|
5Power Supply
5a O±Ring
5b | O±Ring |
| 5b | |
5c | Spring |
| ||
| 5c | |||
18 | Barrel | 46 | ||
| ||||
18b | Cushion | 18 |
| |
46 | Gasket |
|
|
18b
See NOTE after step 3, below.
NOTE: The power cartridge (3) includes items 3a, 3b, 3c, and 5.
Fig 17
5a
3b
3c 2 3a
Power Cartridge Replacement
1.Remove the barrel as described under Barrel Removal.
2.Remove the gasket (46) from the gun. See Fig 17.
CAUTION
The power cartridge is fragile. Be careful when handling it to avoid damage.
3.Grasp the power cartridge with your hand. With a gentle side to side motion, pull it free from the gun handle (2). Then pull the power cartridge straight out of the handle.
CAUTION
DO NOT use solvents to clean the power cartridge cavity in the gun handle (2). Solvent will damage electrical components contained in the power cartridge.
Inspect the power cartridge cavity in the handle for dirt or moisture. Clean out the cavity with a clean, dry rag if necessary.
Lightly lubricate the o±rings (3b, 5a, 5b) on the new power cartridge with petroleum jelly. All the o± rings and the compression spring (5c) must be in place or the gun will malfunction.
NOTE: The cushion (18b) is part of the gun barrel and should never be removed. If it ever is removed, push the cushion, adhesive side in toward the barrel, with a rod until it is securely adhered in the barrel. DO NOT use the power supply (5) to press the cushion into the barrel as it will not ad- here properly.
4. Insert the new power cartridge in the gun handle.
NOTE: See Fig 18 for proper alignment of the power car- tridge (3) in the gun handle (2).
5.Install the gasket (46) in the gun handle (2).
6.Install the barrel on the handle as described under Barrel Removal.
KEY
2Gun Handle
3 | Power Cartridge | 2 |
3
Fig 18
