LTX Series RAC Tip Selection Charts
311052E 33
RAC Switch Tips

FFT Fine Finish RAC Spray Tips

WRX Wide RAC Spray Tips

* Tips are tested in water.

❖Measured with NO airflow. Air assist will tend to reduce pattern lengths by 1 in. to 2 in.

Order desired tip (Part No. FFTxxx) where xxx is

the size code for the chart.

Orifice Size in.
(mm)
* Fluid Output, fl oz/min (lpm) ❖ Maximum Pattern Width at 12 in. (305 mm)
at 2000 psi
(14.0 MPa, 140 bar)
4 to 6
(150)
6 to 8
(200)
8 to 10
(250)
10 to 12
(300)
12 to 14
(350)
0.008 (0.203) 8.8 (0.26) 208 308
0.010 (0.254) 13.9 (0.41) 210 310 410 510
0.012 (0.305) 19.9 (0.59) 212 312 412 512 612
0.014 (0.356) 27.0 (0.80) 214 314 414 514 614

Order desired tip (Part No. WRXxxx) where xxx is

the size code for the chart.

Orifice Size in.
(mm)
* Fluid Output,
fl oz/min (lpm)
❖ Maximum
Pattern Width at
12 in. (305 mm)
at 2000 psi
(14.0 MPa, 140 bar)
24 in.
(610)
0.021 (0.533) 60.5 (1.79) 1221
0.023 (0.584) 72.7 (2.15) 1223
0.025 (0.635) 85.9 (2.54) 1225
0.027 (0.686) 100.0 (2.96) 1227
0.029 (0.737) 115.6 (3.42) 1229
0.031 (0.787) 131.8 (3.90) 1231
0.033 (0.838) 149.4 (4.42) 1233
0.035 (0.889) 168.3 (4.98) 1235
0.037 (0.940) 187.9 (5.56) 1237
0.039 (0.991) 208.9 (6.18) 1239