Repair
14 313889B
Clutch Armature
8. Use an impact wrench or wedge something
between clutch armature (25) and clutch housing to
hold engine shaft during removal.
9. Remove four screws (23) and lock washers (24).
10. Remove armature (25).
Installation
Clutch Armature
1. Lay two stacks of two dimes (or 1.4mm coins) on a
smooth bench surface.
2. Lay armature (25) on two stacks of coins.
3. Press center of hub (26) down to bench surface.
Clamp Removal
1. Remove Engine, page 17, and drain gasoline from
tank according to Honda manual.
2. Tip engine on side so gas tank is down and air
cleaner is up.
3. Use 3/16 in. hex key wrench to loosen two screws
(23) on clamp (22).
4. Push screwdriver into slot in clamp (22) and remove
clamp.
ti5483a
24
25
23
ti6321a
26
25
Gasoline can spill and cause a fire or explosion if engine
is tipped on its side.
ti13250a
ti6199b
22