Repair
313889B 17
Clutch Housing
Removal
1. Remove four screws (20) and lock washers (21)
which hold clutch housing (19) to engine.
2. Remove screw (35) from under mounting plate (D).
3. Pull off clutch housing (19).
Installation
1. Push on clutch housing (19).
2. Install four capscrews (20) and lock washers (21)
and secure clutch housing (19) to engine. Torque to
200 in-lb (22.6 N•m).
3. Install screw (35) from beneath mounting plate (D).
Torque to 26 ft-lb (35.2 N•m).
Engine
Removal
NOTE: All service to the engine must be
performed by an authorized Honda dealer.
1. Remove Pinion Assembly/Clutch Arma-
ture/Clamp and Clutch Housing.
2. Disconnect all necessary wiring.
3. Remove two locknuts (17) and screws (16) from
base of engine.
4. Lift engine carefully and place on work bench.
Installation
1. Lift engine carefully and place on sprayer cart.
2. Install two screws (16) in base of engine and secure
with locknuts (17). Torque to 26 ft-lb (22.6 N•m).
3. Connect all necessary wiring.
4. Install Pinion Assembly/Clutch Armature/Clamp
and Clutch Housing.
ti5486a
21
19
20
D
35
ti5486a
21
19
20
D
35
ti13703a
ti13716a
16
17
ti13716a
16
17
ti13703a