Repair
313889B 23
Installation
1. Adjust piston rod to proper length:
Adjust piston rod with pin holder to pull out piston
rod. Tap piston rod on hard surface to push in piston
rod.
2. Slide pump into connecting rod. Push pump collar
flush with bearing housing ledge to be able to close
pump door.
3. Push pump pin until it is fully retained.
NOTE: Pin will snap into position.
4. Close pump door and rotate latch into position. Do
not tighten latch.
5. Rotate pump until transducer port is aligned directly
to back of sprayer. Connect transducer and hand
tighten securely.
NOTE: Clean out ALL media and debris from trans-
ducer and transducer port before connecting trans-
ducer.
6. Tighten latch and rotate latch lock into locked posi-
tion.
7. Top Coat Pump: Attach drain hose to sprayer.
8. Fill pump with Graco TSL until fluid flows onto top of
seal.
ti5492a
ti6325a
ti13727a ti6378a
ti13728a
ti6313a
ti13729a
ti6312a ti6204a
ti7330a
ti5493a